Pandora Light Pro User Manual

PANDORA LIGHT PRO SERVICESECURITY SYSTEM
PANDORA BT APPLICATION
PANDORA BT application is an additional tool for controlling and managing the
system state. The system can connect only to the mobile device that was previously
registered in the system memory. Registration is performed via encrypted 2.4 GHz
channel using Bluetooth Low Energy protocol. Pandora BT is available on Google Play
for devices with Android 4.4 or higher and with Bluetooth 4.0 Low Energy or higher
module.
Installing the application
You can download Pandora BT application from an app store (Google Play for
Android or AppStore for iOs).
After installing the application, perform the mobile device registration procedure
(see p. 66) «REGISTRATION AND DELETING A MOBILE DEVICE»).
The application usage
The system should be in the Bluetooth radio coverage zone. Start Pandora BT, the
applicationwillautomaticallyfindthesystemandmakeaconnection;afterthatthe
main menu of the application will open.
The main menu «CONTROL» displays the current status of the system and allows
you to control the system using multifunction buttons. Control buttons is used for
controlling the car and quick access to the system functions. The functions can be
switched on or off or the car can be remotely controlled by pressing and holding
any button until the progress bar will fully loaded (3 seconds), this is done to protect
against accidental button press. You can change button location and select the
desired functional in the «CONTROL BUTTONS» settings.

WARNING! Enable Bluetooth function on your mobile device to use
Pandora BT application.

Pandora Light Pro Specifications

General

Brand	Pandora
Model	Light Pro
Category	Car Alarm
Language	English