USER MANUAL
R E M O T E C O N T R O L
«Connection lost» ringtone
notification
alarm signal
all notification are disabled
connect. lost:
ringtone
connect. lost:
alarm
connect. lost:
no sound
connect. lost:
alarm
connect. lost:
ringtone
connect. lost:
alarm
connect. lost:
no sound
To exit menu, press and hold button for 1 second.
MAINTENANCE/VALET MODE
It is recommended to put system into maintenance mode before handing it to
the car service or valet parking. When this mode is switched on, security system stops
interfering with built-in electronics and disables all functions to ease maintenance or
parking. Moreover, you will not have to leave the remote control or radio tag to the
valet or the mechanic. Disabling valet mode is not possible without using the main
remote. This feature is implemented to prevent recording additional remotes during
maintenance without the owner knowing.
To activate maintenance mode when ignition is switched on and a radio tag is in
the coverage zone (if Immobilizer or Anti-hijack mode is activated), select «VALET
MODE» and shortly press button. The system will confirm enabled maintenance
mode with green flash of LED indicator of the VALET button when ignition is
switched on. To exit this mode, select Valet mode and shortly press
button.
To Next Page
Loading...
Need help?
General
