Pantech Jest - Answering Calls

54
55
01
02
03
05
06
07
04
press the OK Key. A conrmation message appears.
“Unassigned” appears if the location is available.
TO ERASE A SAVED SPEED DIAL
1. Slide the phone up, press the [ MENU ], then press 3. Contacts ,
5. Speed Dials .
2. Select the Speed Dial entry you want to erase.
3. Press the Right Soft Key
[ Remove ].
4. “
REMOVE SPEED DIAL? ” appears on the screen. Select Yes and press the OK
Key. A conrmation message appears.
IN CASE OF EMERGENCY
Your phone has a special menu to organize your emergency contacts and personal
information.
TO ASSIGN EMERGENCY CONTACTS
Follow the procedures below to register a Contact to be contacted in case of emergency,
or to register a medical record number or other personal info. To register up to three
dierent Contacts to ICE:
1. Slide the phone up, press the [ MENU ], then press 3. Contacts , 6. In Case
of Emergency
.
Shortcut: From idle mode, slide the phone up and press the Right Soft Key
[Contacts], then select In Case of Emergency and press the OK Key [VIEW].
2. Select Contact 1 , Contact 2 or Contact 3 , then press the OK Key [ ADD ].
3. To select a contact from the Contacts List, press
1. From Contacts , select
the Contact entry, and then press the OK Key. To add a new contact as an ICE
CONTACT, press
2. New Contact , enter the info, and then press the OK Key
[
SAVE ].
4. The Contact name will be displayed in the place of
Contact 1 , Contact 2 or
Contact 3 .
TO REASSIGN EMERGENCY CONTACTS
1. Slide the phone up, press the [ MENU ], then press 3. Contacts , 6. In Case
of Emergency
.
2. Select the contact you want to re-assign, press the Right Soft Key
[ Options ], then press 1. Re-assign .
3. To select a contact from the Contacts List, press
1. From Contacts , select the
Contact entry, and then press the OK Key. To reassign a new contact as an ICE
CONTACT, press
2. New Contact , enter the info then press the OK Key [ SAVE ].
4. A conrmation message appears.
TO UNASSIGN EMERGENCY CONTACTS
1. Slide the phone up, press the [ MENU ], then press 3. Contacts , 6. In Case
of Emergency
.
2. Select the contact you want to unassign, then press the Right Soft Key
[
Options ].
3. Press
2. Unassign .
4. A conrmation message appears.
TO CALL AN ASSIGNED EMERGENCY CONTACT
1. Slide the phone up, press the [ MENU ], then press 3. Contacts , 6. In Case
of Emergency
.
2. Select the contact you want to call and then press the Left Soft Key
[ Call ]
or press the SEND Key
.
TO ADD PERSONAL INFO
To store a Medical Record Number or other information that may be useful in case of an
emergency:
1. Slide the phone up, press the [ MENU ], then press 3. Contacts , 6. In Case
of Emergency
.