121
11.1.7. Auto shut-off setting
"Auto shut-off setting" to set off condition and off delay of printer.
1. Click " " button in control panel to enter "Menu Setting" interface.
2. Click and select “System Setting”-“Auto off set” to set off conditions and delay.
Set auto off condition:
• Shutdown under no-port state (default configuration. : no port is connected, Wi-Fi
function deactivated, printer is under standby or sleep mode.
• Shutdown under idle state: the printer is under standby or sleep mode.
• If auto off condition is satisfied, printer will be off at the preset time.
• After printer is off, power consumption is 0.5W or lower.
• Individual countries (or regions) do not support auto off setting.
To Next Page
Loading...
Need help?
General