91
8.3.8.1. Steps to use Manual Duplex Original Copying
Manual Duplex printing steps are as follows. Take “Duplex→Duplex” mode as example.
1. Put an original into the ADF with its front upward and its top fed first; meanwhile, make sure
there are some paper in the carton.
2. Follow the steps set forth in Chapter 8.3 Select “Duplex→Duplex” printing mode, click “√” and
save the settings.
3. Click “Copy” button to copy.
4. Paper exited should be with the direction as shown in the figure:
To Next Page
Loading...
