Pantum M7100 Series Faq

3. How to setting the Fax sending report on M6800/M7200 Series Printer?
Other Tips: at step4, we can select “NO.1 Turn off” , “NO. 2 Always print” , “NO. 3 Only err ocur”
option through “page up/down” button for other report request. The interface as below:
Step1: Press “Menu” Button on the control
panel, as the arrow indicated.
Step2: Press “page down” Button to
select “1.Fax setting” , then press ”OK”.
Step3: Select “2.Confirm report” by “page
down” button, then press “OK”.
Step4: Select “2.Confirm report” by “page down”
button, then press “OK”. The setting is done.

Pantum M7100 Series Specifications

General

Functionality	Print, Copy, Scan
Print Technology	Laser
Processor Speed	600 MHz
Memory	256 MB
Duplex Printing	Automatic
Scan Type	Flatbed, ADF
Fax Function	No
Paper Input Capacity	250 sheets
Supported Operating Systems	Windows, macOS, Linux
Print Resolution	1200 x 1200 dpi
First Print Out Time	8.2 seconds
Connectivity	USB 2.0
Maximum Monthly Duty Cycle	60000 pages
Recommended Monthly Page Volume	750 - 3, 500 pages
Scan Resolution	1200 x 1200 dpi
Copy Resolution	600 x 600 dpi
Media Sizes Supported	A4, A5, A6, B5, Letter, Legal
Media Types Supported	Plain, Thick, Thin, Cardstock, Label
Print Speed	33 ppm (A4) / 35 ppm (Letter)
Copy Speed	33 cpm (A4) / 35 cpm (Letter)
ADF Capacity	50 sheets
Paper Output Capacity	150 sheets