Pantum M7100 Series Faq

4. How to solve the wireless connection failed when it showed "The
printer cannot connect to any wireless network with the wireless
credentials provided"?
Reason1:
It is inconsistent with the network name, safe mode and password.
Solution:
It needs to enter the corresponding name, mode and password of internet. Please
don’t select “Enter SSID Manually” when you install the driver and select the
corresponding internet SSID and safe mode. And then please enter your internet
password to configure it.
Reason2:
The IP of printer and PC are not under the same router.
Solution:
Please check with your configuration page to confirm the IP address. And please
change your IP address the same with your configuration page

Pantum M7100 Series Specifications

General

Functionality	Print, Copy, Scan
Print Technology	Laser
Processor Speed	600 MHz
Memory	256 MB
Duplex Printing	Automatic
Scan Type	Flatbed, ADF
Fax Function	No
Paper Input Capacity	250 sheets
Supported Operating Systems	Windows, macOS, Linux
Print Resolution	1200 x 1200 dpi
First Print Out Time	8.2 seconds
Connectivity	USB 2.0
Maximum Monthly Duty Cycle	60000 pages
Recommended Monthly Page Volume	750 - 3, 500 pages
Scan Resolution	1200 x 1200 dpi
Copy Resolution	600 x 600 dpi
Media Sizes Supported	A4, A5, A6, B5, Letter, Legal
Media Types Supported	Plain, Thick, Thin, Cardstock, Label
Print Speed	33 ppm (A4) / 35 ppm (Letter)
Copy Speed	33 cpm (A4) / 35 cpm (Letter)
ADF Capacity	50 sheets
Paper Output Capacity	150 sheets