Pantum M7100DW Series User Manual

1.5.Control Panel
1.5.1.Overview of control panel
The layout of the printer control panel is shown below:
Control panel without the fax feature
No.
Name
Functions
1
LCD Display
Display operation interface and product information.
2
Copy Button
Press this button to enter into copy mode.
3
Scan Button
Press this button to enter into scan mode.
4
ID Card Copy Button
Press this button to enter into ID Card Copy mode.
5
Wi-Fi button
6
Bill Copy Button
Press this button to enter into Bill Copy mode.
7
Cancel
Execute cancel operation
Idle state interface under copy mode, to reset the "Number of
Copies" to 01.
8
Start Button
This is used to start relevant operations after finishing operation
settings.
In case of a feed failure, please press this key for pick-up and
printing again.
6
Short press Wi-Fi button to turn on direct Wi-Fi connection of the printer
and automatically print out "Mobile Device Wi-Fi Connection Wizard"
page (for models with Wi-Fi function only).
Long press Wi-Fi button for over 2s to start WPS when Wi-Fi is not
connected or to disconnect Wi-Fi when it has already been connected
(for models with Wi-Fi function only).
Open save toner function(applicable to non-Wi-Fi model only).

Pantum M7100DW Series Specifications

General

Print Technology	Monochrome Laser
Print Resolution	1200 x 1200 dpi
Connectivity	USB 2.0, Ethernet, Wi-Fi
Duplex Printing	Automatic
Input Capacity	250 sheets
Scanner Type	Flatbed, ADF
Processor	600 MHz
Memory	256 MB
Recommended Monthly Page Volume	750 to 3, 500 pages
Scan Resolution	Up to 1200 x 1200 dpi
Copy Resolution	600 x 600 dpi
Operating Systems	Windows, macOS, Linux
Monthly Duty Cycle	60, 000 pages
Output Capacity	150 sheets
ADF Capacity	50 pages
Media Sizes	A4, A5, A6, Letter, Legal
Media Weight	60-163 g/m²
Mobile Printing	Pantum App, Apple AirPrint, Mopria
Print Speed	33 ppm (A4) / 35 ppm (Letter)
Copy Speed	33 cpm (A4) / 35 cpm (Letter)