Pantum P2509 User Manual

4-4
4.3. Setting Network Products
4.3.1. View or Change Network Settings
You can use the embedded Web server to view or change IP settings.
1. Long press the "Cancel/Continue" button on the control panel to print Demo information
page, and view the IP address of the printer. Demo page can be printed by long pressing the
button on the control panel (as shown in the gure below) in the idle status.
2. Type the IP address in the Web browser's address bar to access the embedded Web
server.
3. Click Settings tab to obtain network information. Change the settings as needed.
4.3.2. Set or Change Web Server Login Password
Use the embedded Web server to set a network password or change the existing password.
1. To open the embedded Web server, please log in rst.
2. Click Administrator Settings tab.
3. Type the new password in the Password box and Conrm Password box.
4. At the bottom of the window, click Apply button to save the settings.
4.3.3. Restore to Factory Settings
If you want to reset all parameter settings of the printer, you can restore to the factory settings
by long pressing "Cancel/Continue" button when the printer is powered off to power on it and
holding for 10 seconds until the printer enters Ready status to nish the resetting work.
Note: • The default username is "admin", and the initial password is "000000".

Pantum P2509 Specifications

General

Print Technology	Laser
Print Resolution	1200 x 1200 dpi
Paper Input Capacity	150 sheets
Paper Output Capacity	100 sheets
Maximum Monthly Duty Cycle	15, 000 pages
Processor Speed	600 MHz
Memory	128 MB
Connectivity	USB 2.0
Duplex Printing	Manual
Operating System Compatibility	Windows, Mac OS, Linux
Print Speed	22 ppm (A4)
Media Sizes Supported	A4, A5, A6, Letter, Legal, Executive
Media Types Supported	Plain, Thick, Envelope, Label, Cardstock
Dimensions	337 x 220 x 178 mm
Toner Yield	1, 600 pages
Supported Paper Weight	60 - 163 g/m²