Pantum P3000 Series - Page 64

8-10
Problem Cause Solution
Cyclical traces
appear
• The toner cartridge is dirty.
• The parts inside the toner
cartridge are damaged.
• The fuser component is damaged.
• Clean or replace the toner
cartridge.
• Please contact Pantum
Customer Service to repair and
replace the fuser component.
Skewed pages
• The print media has been loaded
incorrectly.
• The paper path of the printer is
dirty.
• Ensure the correct loading of
the print media.
• Clean paper path inside the
printer.
Wrinkled paper
• The print media has been loaded
incorrectly.
• The print media does not meet
the usage specications.
• The paper path inside the printer
is dirty.
• The fuser component of the
printer is damaged.
• Ensure the correct loading of
the print media.
• Please use print media within
the specication range.
• Clean the paper path inside the
printer.
The back of the
printout is dirty
• The toner cartridge is dirty.
• The transfer roller inside the
printer is dirty.
• The transfer voltage inside the
printer is abnormal.
• Clean or replace the toner
cartridge.
• Clean the internal transfer part
of the printer.
Whole page dark
• The toner cartridge has been
installed incorrectly.
• The inside of the toner cartridge
is damaged.
• Abnormal charge inside the
printer; the toner cartridge is not
charged.
• Ensure the correct installation
of the toner cartridge.