Welcome to the Par T Golf, Double Eagle Elite
Using This Manual
Use this guide now to set up and begin enjoying your Double Eagle . Use it later as a reference for day-to-day
set-up and as a guide for maintenance and troubleshooting.
Chapters 1 through 10 are your complete guide for all phases of installation, from constructing a platform to
aiming and aligning the cameras. These chapters include illustrations along with step by step instructions.
Chapters 11 through 14 detail how to operate, maintain and readjust your simulator. A glossary, an index and an
appendix follow Chapter 14.
Each section begins with introductory text, a table of contents, listing chapters and illustrations within the section
and a key vocabulary.
The manual uses a double column page format. “What” to do appears in a step by step approach in the left
column. Detailed explanations of “How to” carry out the steps appear in the right column. Refer to the right
column only if you need more information to complete that step.
Technical Support
If you run into problems installing or using your new Double Eagle, this manual is the best place to quickly find
help. Check Chapter 13 for troubleshooting tips and answers to frequently asked questions.
W
hen you are unable to find an answer in this guide, call Optronics technical support during business hours (8
am to 4:30 pm MST) at (801) 486-5407 or fax us at (801) 486-6910.
I
NFORMATION in this document is subject to change without notice and does not represent a commitment on the part of
Optronics Limited (hereinafter "Optronics"). The equipment and firmware described in this document are furnished under a
license agreement or nondisclosure agreement. No part of this manual, equipment and/or firmware may be reproduced or
transmitted in any form or by any means, electronic or mechanical, including photocopying, recording, or information
storage and retrieval systems, for any purpose other than the purchaser's personal use, without the express written permission
of Optronics.
Copyright ©
2006 Optronics Limited. All rights reserved. Printed in the United States of America.