Need help?Do you have a question about the Par T Golf Double Eagle Elite Plus 4 and is the answer not in the manual?
Explains how the installation and maintenance manual is organized and how to use it.
Provides phone and fax numbers for technical assistance from Optronics.
Definitions of key terms used in Section A of the manual.
Overview of essential steps and considerations before installing the simulator.
Details requirements for the installation environment, including space and utilities.
Guidance on the optimal placement of the Double Eagle simulator within a facility.
Defines the minimum and recommended dimensions for the simulator's playing space.
Specifies the required electrical circuit, voltage, and wire type for safe operation.
Guidelines for installing power switches and electrical outlets near the simulator.
Advice on avoiding direct sunlight and using appropriate ceiling lighting.
Definitions of key terms related to the simulator platform.
Detailed steps for building the simulator's platform structure.
Procedures for installing the specialized putting carpet onto the platform.
Lists materials and instructions for cutting lumber for platform framing.
Instructions for assembling the platform frame using specified components.
Methods for optionally securing the platform to the floor to prevent movement.
Installing electrical components like power switches and outlet boxes.
Instructions for correctly placing and securing plywood sheets onto the platform frame.
Specifies the diameter and placement of the hole for the ball cup.
General steps and recommendations for installing the putting carpet.
Steps for cleaning the platform and allowing the carpet to relax.
Techniques for cutting the carpet and applying adhesive for secure placement.
Method to ensure full adhesive coverage for optimal carpet bonding.
Final steps involving rolling the carpet to ensure a strong bond.
Positioning the specialized Tri-Turf piece into its designated cutout.
Definitions of key terms related to the simulator frame, canopy, and screen.
Steps for assembling the steel modular frame, canopy, and screen.
Instructions for building the base frame and the upper frame structure.
Attaching the putt-light receptacles to the frame assembly.
Securing the canopy to the upper frame using snap connectors.
Securing the screen to the frame using shock cords and snap connectors.
Installing vertical supports to connect upper and lower frame components.
Joining the upper frame assembly to the base frame structure.
Adding protective padding to the front straight pieces of the frame.
Final canopy attachments to the frame's sides and bottom.
Securing the screen's lower edge to the bottom frame.
Securing the screen's side edges to the frame using shock cords.
Attaching the screen's lower skirt portion to the frame.
Instructions for putting together the projector mount structure.
Steps for securely attaching the projector mount to the ceiling.
Definitions of key terms related to the electronics components.
Steps for installing the Optisense tracking system, ball cup, and speakers.
Instructions for installing and connecting the control console.
Steps for installing and connecting the video projector.
Fine-tuning the projector's focus, alignment, and zoom for optimal image clarity.
Connecting the VGA and auxiliary video cables to the projector and console.
Instructions for mounting the Optisense tracking system onto the frame.
Linking the putting lights and the USB camera cable to the Optisense.
Connecting the Optisense system to a power source.
Installing the drive light onto the Optisense unit.
Installing the putting lights onto the upper front corners of the frame.
Inserting the ball cup into the pre-cut hole on the platform.
Wiring optional speakers to the control console.
Positioning the console and connecting USB, speaker, video, and power cables.
Instructions for securely attaching the projector to the projector mount.
Verification steps to ensure the projector is firmly attached to the mount.
Connecting the SVGA video cable between the projector and the computer.
Connecting optional auxiliary video and power cables to the projector.
Definitions of key terms related to using the simulator.
Instructions for preparing and marking the putting surface for gameplay.
Crucial steps for calibrating and aligning the system's cameras.
Detailed guide on how to start and play rounds of golf on the simulator.
Instructions for connecting and using auxiliary entertainment and teaching tools.
Explanation of target points used for camera alignment.
Description of the camera's visual area and the reference line for aiming.
Overview of the Optisense ball-flight tracking system.
Steps for preparing the putting surface by removing debris.
Instructions for marking the carpet with letters for specific putting positions.
Preparing the installation area and identifying calibration points.
Identifying and marking specific points on the turf for camera alignment.
Activating the calibration software through the touch screen or projected image.
Using objects to test camera fields of vision and check alignment.
Understanding the numerical data displayed during camera calibration.
Adjusting the first camera for proper front-to-back alignment.
Locating the camera's line of detection on the putting surface.
Initial steps to begin a round of golf on the simulator.
Turning on the system and performing the basic game setup.
Fine-tuning Camera #1's depth alignment using adjustment screws.
Fine-tuning Camera #1's horizontal alignment using adjustment screws.
Identifying and marking the line of detection for Camera #2.
Fine-tuning Camera #2's horizontal alignment using adjustment screws.
Adjusting Camera #3 to align with the designated calibration point.
Selecting the desired game mode, such as Stroke Play, or Practice.
Configuring game parameters like the number of holes and players.
Inputting player names, tees, and other relevant details.
Initiating the golf game after all setup parameters are entered.
Instructions on how to use the practice mode for skill improvement.
Initial steps to begin a round of golf on the Eagle Stroke simulator.
Steps for turning on the simulator and inserting the security starter.
Selecting the desired game mode within the Eagle Stroke software.
Choosing various play options such as course, players, and game type.
Configuring the golf course and entering player details.
Initiating the selected golf game after setup.
Instructions for using the practice mode specific to the Eagle Stroke simulator.
Steps for connecting external devices like VCRs or game consoles.
Setting up the system to play movies or other video content.
Wiring VCRs and audio equipment to the control console and projector.
Configuring the projector to accept video input from auxiliary sources.
Definitions of key terms found in the Appendices section.
Guide for diagnosing and resolving common problems with the simulator.
Procedures for routine upkeep to ensure optimal performance.
Alphabetical listing and definitions of technical terms used in the manual.
Details regarding the manufacturer's warranty coverage and exclusions.
Descriptions of alternative game modes available on the simulator.
Diagnosing 'Check Camera' message and its resolution steps.
Steps to resolve the camera communication issue, including cable checks and reinitialization.
Troubleshooting light failures by checking bulbs, fuses, and power supply.
Diagnosing and resolving power loss issues for the Optisense system.
Camera sees object without identification; solutions include cleaning and checks.
Camera identifies object; solutions involve sensitivity adjustment.
Issues with tracking shots accurately; solutions include alignment and filter cleaning.
Checking connections for console issues and general troubleshooting.
Addressing system lock-ups and error displays.
Steps to resolve freezing issues, including rebooting the system.
Troubleshooting printer issues and checking connections.
Steps to fix printer problems, including checking cables and replacement.
Troubleshooting power loss to the control console.
Steps to restore console power by checking outlets and supply.
Guidance on projector-specific issues and contacting manufacturer support.
Routine cleaning and checks performed daily.
Daily task of vacuuming the simulator's carpet.
Periodic checks and cleaning performed monthly.
Monthly checks for camera alignment and sensitivity adjustments.
Monthly task of cleaning infrared light filters for optimal performance.
Dusting sensitive components like cameras and the control console.
Maintenance tasks performed as necessary.
Tasks for cleaning the screen and projector for image clarity.
Definitions of technical terms starting with letters A through D.
Definitions of technical terms starting with letters E through H.
Details regarding the manufacturer's warranty coverage and specific exclusions.
Explanations of alternative game modes like Scramble, Skins, and Shootout.
Instructions for preparing .bmp advertisement files and loading them onto a CD.
Instructions for loading advertisement files from CD or USB drive.
Steps to upgrade the Double Eagle software from a previous version.
List of keyboard commands and their functions for Eagle Stroke gameplay.
General| Brand | Par T Golf |
|---|---|
| Model | Double Eagle Elite Plus 4 |
| Category | Video Gaming Accessories |
| Language | English |
To Next Page