SECTION F APPENDICES F18
INDEX
Area Requirements: A3 and Drawing 2A. Par T Optisense™, Installation: D3
Advertising On Screen: F16 Double Eagle
F17 Eagle Stroke
Ball Cup Hole, Location: B4 and Figure 4
Par T Tri-Turf
™
, Def: B1
Ball Cup, Installation of: D5
Platform: A-1
Cables, Def: D1. Measurements of: A3
Optronet, D4. Bill of Materials for: B2
Putting Light, Installation of: C2 Instructions for: B2
Framing of: B2
Auxiliary Video, C9 Electrical Connections within: B3
SVGA, Installation of: C9 Attaching plywood to: B4 & Figure 4
Cutting out ball cup hole in: B4
Calibration Point, Def: E1; Aiming cameras: E5 Framing courtesy walls on: B4
Attaching Turf to: B11
Attaching Tri-Turf to: B12
Camera Line, Def: E1, Aiming cameras: E5
Camera Sensitivity, Def: E1; Adjusting: F5
Putting Lights, Def: D2; Attachment of: D5
Camera-Field of Vision, Def: E1. Screen, Def: C1; Attaching to Canopy and Frame: C6.
Canopy, Def: C1; Attaching to Frame: C6. Shock Cord, Def: C1; Proper Screen tension: C8.
Changing Golf Courses: E8
Square Tubing, Def: C1
Control Console: D6; Start Play, Steps to: E8
Electrical Outlet for: A5;
Installation of: D6 Sun Light, Avoiding excessive: A2
Connecting cables to: D8
Troubleshooting of: F8 Transformer, When needed: A4.
Maintenance for: F11
Troubleshooting:
Courtesy Walls, Construction of: B4 and Figure 5 Cameras: F4
Control Console and Projector: F6, F10
Dedicated Electrical Circuit, Def: A2, 15 Ampere needed for
simulator: A4.
Optisense: F2
Drive Light, Def: D1; Attachment of: D5 Turf, Putting, Installation procedure: B11
Carpet Adhesive, Def: B11
Practice Option, Using: E9
Upgrade Software, F17
Duplex Electrical Boxes, Def: A1
Wattage, Of each component: A4
Electrical Power Requirements: A4 .
Electrical Outlets, Location of: A4 and Drawing 3A; Installation
of: B3.
Frame, Assembly of: C2.
Hacker Guard, Def: D1
Lighting Requirements: A5
Power Switches, Def: A1; Location of: A4.
Optisense™ Cameras & Infrared Lights, Aiming and
aligning: E5; Troubleshooting: F2; Maintenance for: F11.
To Next Page
Loading...