Par T Golf Double Eagle Elite Plus 4 - Chapter 12: Movies, Video Games, and Teaching Aids; Connecting Auxiliary Electronic Equipment; Playing Movies and Video Content; Connecting VCR and Audio Equipment

PAR T GOLF DOUBLE EAGLE INSTALLATION AND MAINTENANCE MANUAL
SECTION E ENJOYING YOUR SIMULATOR
E14
Chapter 12 MOVIES, VIDEO GAMES, AND TEACHING AIDS
Your new Double EAGLE can become a movie theater, a giant-sized game center, an advanced teaching tool and
a multitude of other income centers. This chapter describes the steps for connecting any auxiliary electronic
entertainment, such as a game station or VCR, to the control console and video projector.
CONNECTING AUXILIARY ELECTRONIC EQUIPMENT
Playing Movies
–
Place a DVD into the DVD R/W Rom Drive (Drawing 11B). Touch
Watch Video on the select screen. (Drawing 11C). A Video player opens
on the screen for your control.
STEP 1 Connect Cables for VCR
–
Some or all of the cables may already be connected (see Chapter 7 & 8).
Video Cable – Projector to
Control Console (optional)
Drawing 12A and
Drawing 8B
–
–
The heavy gauge auxiliary video cable should have been attached to the
projector mount and to the projector.
If this step has not already been performed, connect auxiliary video
cable to the projector at the VIDEO IN port.
Connect auxiliary video cable to the control console at the AUX VIDEO
OUT port.
Video Cable – Auxiliary
Entertainment (Hi-Fi VCR
etc.) to control console.
–
Connect the light gauge video cable to the control console at AUX
VIDEO IN port.
Connect video cable to auxiliary entertainment at the VIDEO OUT port.
Audio Cable – Auxiliary
Entertainment (VCR etc.) to
Control Console
–
Connect the two-wire audio cable to control console at AUX AUDIO IN
left/right ports.
Connect audio cable to Aux. Entertainment at AUDIO OUT L/R ports.
STEP 2 Audio Select
–
Locate the small toggle switch, on the side of the control console,
marked AUDIO SELECT. Flip it up to the AUX position.
STEP 3 Set Projector Channel to
VIDEO
–
Using the video projector's remote control, change the projector’s input
from RGB to VIDEO (This can easily be done by selecting INPUT on
the projector’s remote control).
STEP 4 Start Play
–
Follow the normal operation procedure for starting your auxiliary
entertainment. Its images should be projected onto the large screen for
maximum enjoyment.