ParaBody 425103 - Page 6

6
FIGURE 3
STEP 3
• SECURELY assemble three 4-1/2” PULLEYS (43) to the upper flats on the BASE (1) using three 3/8 X 2” BOLTS (84), six 3/8”
WASHERS (91), three 2-7/8” L-BRACKETS (44), and three 3/8” LOCK NUTS (92). See FIGURE 3.
• SECURELY assemble one 4-1/2” PULLEY (43) to the lower flat on the BASE (1) using one 3/8 X 2” BOLT (84), two 3/8”
WASHERS (91), and one 3/8” LOCK NUT (92). See FIGURE 3.
84 3/8 X 2”
92
91
43
92
91
1
44
91
43