PANEL ANSWER OPTIONS
First digit disables “Answering Machine Override” (key [2
ND] or key [1]), or determines period of time between first and
second call (see table below). Second digit determines number of rings required before panel will answer. If [2ND][2ND] is
entered, panel will not answer. (Default value is [2ND] [8].)
TELEPHONE AND ACCOUNT NUMBERS
If only one central station phone number is used, program the same number for telephone number 1 and 2. If only one
account number is required, the same number must be entered for both account "A" and "B". (No Default)
[10] = the number "0" [BYP] = switch from pulse to tone while dialing
[11] =
*
[MEM
]
= pause 4 seconds
[12] = # [TRBL
]
= end of number
COMPUTER TELEPHONE NUMBER (View at addresses 008 to 015.)
02 __ / __ / __ / __ / __ / __ / __ / __ 03 __ / __ / __ / __ / __ / __ / __ / __
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
CENTRAL STATION TELEPHONE NUMBER 1 (View at addresses 016 to 023.)
04 __ / __ / __ / __ / __ / __ / __ / __ 05 __ / __ / __ / __ / __ / __ / __ / __
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
CENTRAL STATION TELEPHONE NUMBER 2 (View at addresses 024 to 031.)
06 __ / __ / __ / __ / __ / __ / __ / __ 07 __ / __ / __ / __ / __ / __ / __ / __
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
ACCOUNT "A" AND "B": (View at addresses 032 to 035.)
08 __ / __ / __ / __ __ / __ / __ / __
1 2 3 4 5 6 7 8
AB
2
Press [
TRBL] to end phone
number if less than 16 digits
are programmed.
Press [TRBL] to end phone
number if less than 16 digits
are programmed.
For 3 digit account numbers,
enter "skip" ([2
ND]) as first
digit.
Press [
TRBL
] to end phone
number if less than 16 dig
its
are programmed.
Streamline
section
Streamline
section
Streamline
section
Streamline
section
Streamline
section
Streamline
section
Streamline
section
To Next Page
Loading...
