REPORTING CODES: All digits from [1] to [F] are valid. [2ND] = digit will not be reported except for contact I.D.
programmable codes. For single digit reporting enter "skip" ([2
ND]) as first digit. (Default = “empty" [2ND][2ND
])
If CONTACT I.D. format (all codes) is selected, addresses 300 to 527 (sections 11- 67) do not have to be programmed.
(Select Contact I.D. (all codes) - key [10] for both central station numbers at section 09 - address 038.)
4
To Next Page
Loading...
