Paradox MG5050 User Manual

6 User Guide
Partitioning
Your system is equipped with a partitioning feature that can divide your alarm system into two distinct areas identified as Partition 1 and
Partition 2. Partitioning can be used in installations where shared security systems are more practical, such as a home office or
warehouse building. When partitioned, each zone, each user code and many of your system's features can be assigned to either
Partition 1, Partition 2, or both partitions.
If the system is not partitioned, all zones, user codes, and features will be recognized as belonging to Partition 1.
Figure 4: MG32LCD (32-zone Wireless LCD Keypad Module)
Indicator Lights
Power light (yel)
On = Power on
Off = Power off
StayD light (grn)
On = StayD mode enabled
Keys
= Press once + [MASTER CODE] for Quick Menu
programming
= Press & hold for keypad settings
= Press & hold for chime programming
[
TBL] = Trouble display
[
MEM] = Alarm memory display
[
BYP] = Bypass programming

Paradox MG5050 Specifications

General

Partitions	2
User Codes	32
Wireless Zones	32
Event Buffer	256 events
Remote Controls	Supports up to 32 remote controls
Standby Current	85 mA
Zones	32
Communication	GSM
Humidity	5% to 90% non-condensing
Input Voltage	16.5 VAC