REMOTE CONTROL ASSIGNMENT (Liberator Only)
Section # Serial #
[721] ___/___/___/___/___/___REMOTE CONTROL #1
[722] ___/___/___/___/___/___REMOTE CONTROL #2
[723] ___/___/___/___/___/___REMOTE CONTROL #3
[724] ___/___/___/___/___/___REMOTE CONTROL #4
[725] ___/___/___/___/___/___REMOTE CONTROL #5
[726] ___/___/___/___/___/___REMOTE CONTROL #6
[727] ___/___/___/___/___/___REMOTE CONTROL #7
[728] ___/___/___/___/___/___REMOTE CONTROL #8
NOTE: Use the Serial Number Display (see page23) to find out the serial number of a remote control. To delete
a remote control, enter the desired section then enter a value of 000000.
REMOTE CONTROL ASSIGNMENT (1755, 1755EX, 1758 and 1758EX Panels Only)
Section #
[731] PRESS A BUTTON ON A REMOTE CONTROL TWICE. YOU WILL HEAR A CONFIRMATION BEEP = REMOTE CONTROL #1
[732] PRESS A BUTTON ON A REMOTE CONTROL TWICE. YOU WILL HEAR A CONFIRMATION BEEP = REMOTE CONTROL #2
[733] PRESS A BUTTON ON A REMOTE CONTROL TWICE. YOU WILL HEAR A CONFIRMATION BEEP = REMOTE CONTROL #3
[734] PRESS A BUTTON ON A REMOTE CONTROL TWICE. YOU WILL HEAR A CONFIRMATION BEEP = REMOTE CONTROL #4
[735] PRESS A BUTTON ON A REMOTE CONTROL TWICE. YOU WILL HEAR A CONFIRMATION BEEP = REMOTE CONTROL #5
[736] PRESS A BUTTON ON A REMOTE CONTROL TWICE. YOU WILL HEAR A CONFIRMATION BEEP = REMOTE CONTROL #6
[737] PRESS A BUTTON ON A REMOTE CONTROL TWICE. YOU WILL HEAR A CONFIRMATION BEEP = REMOTE CONTROL #7
[738] PRESS A BUTTON ON A REMOTE CONTROL TWICE. YOU WILL HEAR A CONFIRMATION BEEP = REMOTE CONTROL #8
NOTE: If you hear rejection beep, an error has occurred or the remote control has already been assigned. To
delete a remote control, enter the desired section then press the [FORCE] key.
REPROGRAM ALL MODULES
[750] AFTER REMOVING AN EXPANSION MODULE FROM THE COMMUNICATION BUS, THE CONTROL PANEL KEEPS THE MODULE’S
PROGRAMMED SECTIONS IN MEMORY. THEREFORE, IF YOU ADD OR REPLACE A MODULE YOU CAN RE-PROGRAM THE
MODULE WITH THE SETTINGS SAVED IN THE CONTROL PANEL. TO DO SO, ENTER SECTION [750] AND PRESS [ENTER].
THE KEYPADS WILL BEEP TWICE EVERY SECOND UNTIL THE PROCEDURE IS COMPLETED.
PARADOX MEMORY KEY
[900] DOWNLOAD FROM PARADOX MEMORY KEY TO DESTINATION CONTROL PANEL (FOR DETAILS SEE PAGE 5).
[902] COPY TO MEMORY KEY FROM SOURCE CONTROL PANEL (FOR DETAILS SEE PAGE 5).
To Next Page
Loading...
Need help?
General
