Paradox Spectra SP7000 User Manual

Magellan & Spectra SP • Programming Guide
Version 4.7/4.92/5.12
Software Options and Additional Timers | 51
Communication Report Codes
Use worksheet 47 to record your settings for communication report codes. Sections [879] and [884] apply to both GSM and network (GPRS/GSM) communications.
See Communication Programming on page 42, for more communication features. In addition, refer to Description of Sections [966] and [967] on page 54, for clearing
and resetting codes.
Communication Restore Report Codes
Use worksheet 48 to record your settings for communication restore report codes. Section [881] applies to both GSM and network (GPRS/GSM) communications.
Software Options and Additional Timers
Use the following section to program software options and additional communication timers on your MG/SP control panel.
Additional Communication Timers
Use worksheet 49 to record your settings for sections [901] and [902]. For additional timers, see worksheets 38 and 40. Sections [901] and [902] are also applicable
when using a VDMP3 Plug-in Voice Dialer.
RF zone supervision lost 1 381 Loss of supervision - RF US Untype zone supervision
RF zone supervision restore 3 381 Supervision restore - RF UR Untyped zone restoral
RF module supervision lost 1 381 Loss of supervision - RF US Untyped zone supervision
RF module supervision restore 3 381 Loss of supervision - RF restore UR Untyped zone restoral
RF module tamper 1 145 Expansion module tamper ES Expansion device tamper
RF module tamper restore 3 145 Expansion module tamper restore EJ Expansion device restore
Paramedic alarm 1 1AA Medical MA Medical alarm
Zone forced 1 57A Zone forced XW Zone forced
Zone included 3 57A Zone included UU Zone included
Remote low battery 1 338 Battery failure on module YT Module battery fail
Remote low battery restore 3 338 Battery failure on module restore YR Module battery fail restore
Failed to arm 1 454 Failed to close CI Failed to close
Worksheet 47: Communication Report Codes
Section Data Description Section Data Description Section Data Description
[879]
___/___ PCS series RF jam
[880]
___/___ -
[884]
___/___
GSM lost communication
with panel
___/___ PCS series no service ___/___ IP100 no service ___/___ -
___/___
PCS series module
supervision lost
___/___ IP100 supervision lost ___/___ -
___/___
Receiver fail to
communicate (GPRS)
___/___
IP receiver fail to
communicate
___/___ -
Worksheet 48: Communication Restore Report Codes
Section Data Description Section Data Description
[881]
___/___ PCS series RF jam
[882]
___/___ -
___/___ PCS series no service ___/___ IP100 no service
___/___ PCS series module supervision lost ___/___ IP100 supervision lost
___/___ Receiver fail to communicate (GPRS) ___/___ IP receiver fail to communicate
Table 46: Description of section [900] (WinLoad/BabyWare options)
Section Option Description OFF ON
[900]
1Call back  Disabled

Enabled
2 Automatic event buffer transmission  Disabled

Enabled
= Default
Worksheet 49: Additional Communication Timers
Section Data Description Default
[901] ___/___/___ 000 to 255 rings Number of rings 008
[902] ___/___/___ 000 to 255 secs. (max 127) Answering machine override delay 030
Table 45: List of automatic report codes (Continued)
System Event Default Contact ID Report Code Default SIA Report Code

Paradox Spectra SP7000 Specifications

General

Brand	Paradox
Model	Spectra SP7000
Category	Security System
Language	English