Paravan SPACE DRIVE II - Put the Locking Pin in the Correct Position; Fig. 7: Locking Pin Position

General Information
Prepare
Operate Help Technology
Preparation of the vehicle for driving
54
9.1.1 Put the locking pin in the correct position
1. Remove the locking pin from the steering servo-motor. -> Press
and hold the internal button  of the locking pin. -> Pull out the
 locking pin.
2. Perform the "Align steering and steering servo-motor" work steps.

See Section "9.1.2 Align steering and steering servo-motor"
3. Connect and latch steering column and steering servo-motor. ->
Press and hold the  locking pin. -> Push the unlocking bolt 
forwards. -> Release the  locking pin.
Fig. 7: Locking pin position