Pari Boy Pro - Maintenance; Material Information

This nozzle insert is also designed for use by adults and
children to reach either deep lung regions or regions which
are severely constricted due to disease.
With the LCinterrupter, the aerosol generation can be interrup-
ted briefly during an inhalation session.
Mask
The mask makes it possible to inhale aerosol through the
mouth and the nose.
The patient can breathe out through the exhalation valve at the
bottom end of the mask without having to take the mask off.
The mask can be held firmly in position on the face with the aid
of the elastic band which is attached to the side openings of
the mask.
2.4 Material information
The individual product components are made from the follow-
ing materials:
Product component Material
Nebuliser upper part Polypropylene, thermoplastic elastomer
Nozzle insert Polypropylene
Nebuliser lower part Polypropylene, thermoplastic elastomer
LCinterrupter Polypropylene
Mouthpiece (with
exhalation valve)
Polypropylene, thermoplastic elastomer
Connection tubing Polyvinyl chloride
Tubing endpiece Thermoplastic elastomer
PARIchildmasksoft Polypropylene, thermoplastic elastomer
Elastic band Synthetic rubber
2.5 Maintenance
The compressor is maintenance free.
– 16 –