Pari Boy Pro - Troubleshooting; Compressor Not Starting; No Aerosol Production

5 TROUBLESHOOTING
The compressor must not be repaired except by the Technical
Service of PARIGmbH or a service center expressly
authorised to do so by PARIGmbH. If the compressor is
opened or manipulated by anyone else, all claims under the
warranty shall be void. In these cases, PARIGmbH will accept
no liability.
Fault Possible cause Remedy
The com-
pressor does
not start up.
The power plug is
not plugged into the
mains socket
properly.
Check whether the power
plug is plugged into the
socket correctly.
The supply voltage is
not suitable for run-
ning the compressor.
Check whether the local sup-
ply voltage matches the
voltage data marked on the
compressor identification
label.
No aerosol is
coming out of
the nebuliser.
The nebuliser nozzle
attachment is
blocked.
Clean the nebuliser.
The connection
tubing is not connec-
ted properly.
Check that the tubing con-
nectors are connected firmly
to the compressor and the
nebuliser.
The connection
tubing is leaking.
Replace the connection
tubing.
– 36 –