EN | User Manual General information
4 BSP-MT 10-95/D3
General information
Manufacturer’s details
Name and address
Parker Hannifi n Manufacturing S.r.l.
Sede Legale: Via Sebastiano Caboto 1, Palazzina “A” 20094 Corsico (MI) Italy
Sede Operativa: Gas Separation and Filtration Division EMEA - Strada Zona Industriale, 4
35020 S.Angelo di Piove (PD) Italy
tel +39 049 971 2111- fax +39 049 9701911
Web-site: www. parker.com/hzd
Details on the dryer
Standard equipment
Standard dryer*, consisting of
◊ 1 double-chamber hollow section vessel, llied with drying agent
◊ 1 single-chamber hollow section vessel, lled with purifying agent
◊ 2 upstream lter
◊ 1 downstream lter
◊ Muf er
◊ Control system
Associated documents
◊ Operating instructions (present)
◊ Technical documentation (see annex)
◊ Circuit diagrams (see separate document)
◊ Operating manual for installed lters (separate document)
Notes on supplementary documents
Supplementary documents such as operating manuals for options or pertaining components
must always be heeded. They contain additional information, e.g. regarding maintenance,
and are therefore necessary for safe operation of the plant.
*
Planned dryers may be equipped with special components
To Next Page
Loading...
