INSTALLATION & MAINTENACE MANUAL
RCOe2100/03.06
1.8 – Manufacturer Responsibility
The manufacturer declines any responsibility in case of:
use of the product not according to the safety regulations and legislation valid in the user’s country;
use of the product in operating conditions not allowed according to the product technical
documentation;
improper installation: the instructions given in this manual are not followed or not properly followed;
hydraulic system problems;
modification or manumission of the product;
operations executed by personnel not properly trained or not assigned to such a kind of operations.
The safety of the product depends upon the strict observation of the indications given in this manual; in
particular, it is necessary:
to always operate within allowed product working operating conditions
2
to always perform an accurate ordinary maintenance activity;
to assign the inspection activity as well as maintenance activity to duly trained personnel;
to only use original spares;
to always use the product according to the indications you find in this manual.
The instructions of this manual are in addition and do not replace the obligations we
are required to comply with in accordance to the currently valid safety regulations and
legislations.
2
Pls. refer to the “Technical Catalogue” of the unit in usage.
To Next Page
Loading...
