Parker F12 series - Shaft Seal Replacement; Remove Retaining Ring for Seal; Remove Seal Carrier; Tap Out Shaft Seal

17
Parker Hannin
PumpandMotorDivision
Trollhättan,Sweden
ServiceManual
Series F12
HY30-5504-M1/UK
Removetheretainingring(item237).
Removethesealcarrier(item231).
Taptheshaftsealoutwithhammerand
mandrel.
Tapthenewshaftsealbackwithatubeand
ahammer.
Theoutsidediameteronthetubeis65mm.
237
231
Change of shaft seal