Parker F12 series - Check Timing (F12-150); Install Shaft Seal and Support Ring (F12-150); Install Retaining Ring and Lubricate Seal (F12-150); Assemble and Torque Bearing Housing (F12-150)

22
Parker Hannin
PumpandMotorDivision
Trollhättan,Sweden
ServiceManual
Series F12
HY30-5504-M1/UK
Assembly F12-150
9.Makesurethetimingiscorrect.
10.Assembletheshaftseal(item233)
andthesupportring(item236).Locate
thechamferonthesupportringdown-
wards.Tapitdownwithaplasticcollar.
11.Assembletheretainingring(item
237).Lubricatetheshaftsealbefore
assemblingthehousing.
12.Assemblethebearinghousing(item
211),tapitdownwithaplastichammer.
Torquethescrewsto220±35Nm.