Parker F12 series - Tap Bearing Package into Housing (F12-250); Assemble Pistons with Lubrication (F12-250); Assemble Bearing Components (F12-250); Assemble Spring Pins and Sliding Plate (F12-250)

25
Parker Hannin
PumpandMotorDivision
Trollhättan,Sweden
ServiceManual
Series F12
HY30-5504-M1/UK
Assembly F12-250
5.Tapdownthebearingpackageinto
thebearinghousing(item211)byusing
aplasticcollarandaplastichammer.
6.Assemblethepistons(item440).
Lubricatetheballsocketsbefore
assembling.
7.Assemblethetaprolbearing(item
425),thediscspring(item433),the
spacerwasher(item426)andthere-
tainingring(item427).
8.Pressdownthebearingring(item
425),thespacersleeve(item422),the
neddlebearings(item415)andthe
retainingring(item414).
Locatetheneedlebearingsagainstthe
retainingring.
Assemblethespringpins(item413)
andtheslidingplate(item424).