Parker HTG Series - Page 32

32
Parker Hannin Corporation
Hydraulic Pump/Motor Division
Greeneville, Tennessee USA
HY13-1524-002-M1/US
Disassembly & Inspection
Service Manual
HTG Series Integrated Hydrostatic Transmission
HY13-1528-001-M1/US—HTG Series Service Manual
Disassembly and Inspection
Step
InstructionIllustration
Remove bottom cover 1. Using ratchet and a 3/8” socket , loosen
the 10 screws from the bottom cover.
2. Remove screws and inspect for
damage.
Remove gasket from bottom
of cover
Discard Gasket and replace with new.
Remove two (2) charge pump
cover bolts
2. Remove and inspect for damage.
1. Using ratchet and a ½” socket , loosen
charge pump cover bolts.
Go to Next Step