Parker HTG Series - Page 31

31
Parker Hannin Corporation
Hydraulic Pump/Motor Division
Greeneville, Tennessee USA
HY13-1524-002-M1/US
Disassembly & Inspection
Service Manual
HTG Series Integrated Hydrostatic Transmission
HY13-1528-001-M1/US—HTG Series Service Manual
Disassembly and Inspection
Step
InstructionIllustration
Removefour bolts from inside
pump
1. Loosen and remove four bolts from in-
side the pump using a ratchet and a
9/16” socket.
2. Inspect bolts for damage.
Removefilter tube.
Separatepump section from
the motor.
Go to Next Step