8 - EN
2.3 Weights and Dimensions
2.4 Materials of Construction
Model
Dimension
Weight
H W D (a) (b) (c) (d) (e) (f) (g)
mm ins mm ins mm ins mm ins mm ins mm ins mm ins mm ins mm ins mm ins Kg lbs
N2-20P
1894 74.6 550 21.7 893 35.2 500 19.7 535.5 21.1 350 13.8 853.5 33.6 1007 39.6 1271 50 1739 68.5 299 659.2
N2-25P
1894 74.6 550 21.7 1062 41.8 500 19.7 704.5 27.7 350 13.8 853.5 33.6 1007 39.6 1271 50 1739 68.5 384 846.6
N2-35P
1894 74.6 550 21.7 1231 48.5 500 19.7 873.5 34.4 350 13.8 853.5 33.6 1007 39.6 1271 50 1739 68.5 469 1034.0
N2-45P
1894 74.6 550 21.7 1400 55.1 500 19.7 1042.5 41.0 350 13.8 853.5 33.6 1007 39.6 1271 50 1739 68.5 553 1219.2
N2-55P
1894 74.6 550 21.7 1569 61.8 500 19.7 1211.5 47.7 350 13.8 853.5 33.6 1007 39.6 1271 50 1739 68.5 638 1406.5
N2-60P
1894 74.6 550 21.7 1738 68.4 500 19.7 1380.5 54.4 350 13.8 853.5 33.6 1007 39.6 1271 50 1739 68.5 722 1591.7
N2-65P
1894 74.6 550 21.7 1907 75.1 500 19.7 1549.5 61.0 350 13.8 853.5 33.6 1007 39.6 1271 50 1739 68.5 807 1779.1
N2-75P
1894 74.6 550 21.7 2076 81.7 500 19.7 1718.5 67.7 350 13.8 853.5 33.6 1007 39.6 1271 50 1739 68.5 892 1966.5
N2-80P
1894 74.6 550 21.7 2245 88.4 500 19.7 1887.5 74.3 350 13.8 853.5 33.6 1007 39.6 1271 50 1739 68.5 976 2151.7
Silencer Baffle and End Cap
Aluminium
Columns, Manifolds and Exhaust Manifolds
Aluminium Extrusion EN AW-6063 T6
Manifold and Purge End Plates
Cast Machined EN AW-6082 T6
Inlet, Outlet and Equalisation Valve Plates
Machined EN AC-44100-F
Inlet and Exhaust Cylinders
Aluminium Alloy
Generator Feet
8MM Steel Plate
Dust Filter
Aluminium Housing
Fittings
Nickel Plated Brass and Nickle Plated Mild Steel
Pressure Gauges
Steel casing and dial, brass connector and movement
Adsorbant
Carbon Molecular Sieve (CMS)
Seal Materials
Nitrile, Viton, EPDM, PTFE (tape)
Paint
Epoxy coated
(b)
(a)
(d)
(c)
(e)
(f)
(g)
W
H
D
To Next Page
Loading...
