Parker Parflex - Protection Devices

Parker Hannifin Corporation
Parflex Division
Ravenna, Ohio
Bulletin No. 4660-PGP2T
11
Parflex
®
Flexible Gas Piping System
Design and Installation GuideSection 2.0 System Components
Flexible Steel Conduit
For protection of Parflex tubing from puncture at points of support near flange outlets, short tubing runs and
where tubing is routed horizontally between studs. Available in bulk length coils and precut 12 inch lengths for
all sizes.
Part No. Nom. ID Nom. OD
Min
Bend
Radius
(in.)
Weight
/ 100 ft.
(lbs.)
Coil
Length
(ft.)
PGPSC-6-50FT 0.63 0.77 2-3/4 17.5 50
PGPSC-8-50FT .089 1.08 3-1/4 26 50
PGPSC12-25FT 1.19 1.39 3-3/4 41.60 25
PGPSC-16-25FT 1.51 1.77 4-1/2 60 25
PGPSC-20-25FT 2.25 2.45 6-1/2 92 25
Part No.
Nom.
ID
Nom.
OD
Min
Bend
Radius
(in.)
Weight
/ 100 ft.
(lbs.)
Pack-
age Qty.
(pcs.)
PGPSC-6-12IN 0.63 0.77 2-3/4 15 50
PGPSC-8-12IN .089 1.08 3-1/4 26 50
PGPSC-12-12IN 1.19 1.39 3-3/4 45 25
PGPSC-16-12IN 1.51 1.77 4-1/2 62 25
PGPSC-20-12IN 2.25 2.45 6-1/2 83 25
Tubing Protection Components
Striker Plates
Part No.
Length
(in.)
Width
(in.)
Weight
(lbs.)
QSP 1.5 3.5 0.07
HSP 6.5 3.5 0.31
FSP 11.5 3.5 0.55
PSP 17 7 1.80
3-1/2"
5"
5"
FULL STRIKER PLATES
SUPPORT
NAIL
NON-RESTRAINED
PGP PIPING
WALL
PROTECTED
AREA
HALF STRIKER
PLATE
PROTECTED
AREA
LESS THAN 2"
5"