Parker Parflex - Manifolds

Parker Hannifin Corporation
Parflex Division
Ravenna, Ohio
Bulletin No. 4660-PGP2T
13
Parflex
®
Flexible Gas Piping System
Design and Installation GuideSection 2.0 System Components
Distribution Manifolds
Malleable Iron Manifold
(Coated to Prevent Rust)
Part No. BM4P-8
Optional: Manifolds can be made using code approved mal-
leable iron tees and nipples.
Malleable Iron Tees and Nipples
(made with code accepted materials)
Manifold Mounting Bracket
Part No. WMB-1
Part No. A B C D E F NPT Thread NPT
Weight
(lbs.)
BM4P-8 9.56" 1.31" 1.31" 2.31" 1.31"
3/4-14
Female
1/2-14
(4 ports)
2.10
4PM-8 11.19" 1.31" 2.13" 2.31" 2.13"
3/4-14
Male
1/2-14
(4 ports)
2.05
Malleable Iron Manifold
(Coated to Prevent Rust)
Part No. 4PM-8
Gas Load Center
1. Metal enclosure with pre-installed mounting bracket.
2. Metallic face plate.
*All piping, valve, regulator, union
and manifold not included.
Part No.
Enclosure Panel
Dimensions (in.)
Face Ring / Door
Dimensions (in.)
Weight
PGLC
W: 14-1/2
H: 18
D: 5-1/4
W: 14-1/2
H: 18
17.00
Appliance Ports