Parker Parkrimp 2 – 83CE-083U User Manual

Maintenance
6-2
6.1 Daily maintenance
Maintenance objects Actions (to be performed by operator)
Figure 6-2 Plant
Perform a visual inspection of the plant
for
 cleanliness
 leaks
 outside damage
Figure 6-3 Crimping tool
Perform a visual inspection of the crimping tool
for
 cleanliness
 proper condition
Figure 6-4 Level indicator
 Check the hydraulic oil level on the level indi-
cator.
 The oil level is in the centre.
 Remove oil, dirt dust and chips using a vacu-
um cleaner.
Construction and Function
3-4
3.2.1 Assembly instructions
Figure 3-7 Rear die ring half
 Move cylinder and pusher fully up.
 Push rear die ring half up and lock it using a pin.
Figure 3-8 Adapter element
 Insert adapter element into die holder. Tilt it slight-
ly and position correctly.
Figure 3-9 Die set
 Insert die set into lubricated tool holder ensuring
that the individual segments are distributed even-
ly. The die sets are colour-coded according to
hose size.
Construction andConstruction and Function
3-3
Figure 3-5 Front crimp ring half mounted
Figure 3-6 Control panel
1 Lift pusher
2 Lower pusher
 Move the pusher up (lift pusher).
 Remove the front crimp ring half.
 Remove the workpiece from the tool (safety dis-
tance 120 mm minimum).
 Check the correct seat of the fitting and the cor-
rect dimension.
2
1
Parkrimp
®
2 – 83CE-083U
Instruction Manual
Instruction Manual
Hose Crimper Machine Parkrimp

2 83CE-083U

Parker Parkrimp 2 – 83CE-083U Specifications

General

Brand	Parker
Model	Parkrimp 2 – 83CE-083U
Category	Crimp tool
Language	English

Summary

Introduction, Designated Use

1.1 Fundamentals

1.3 Designated use

Details the specific industrial applications, limitations, and conditions for the crimping machine.

Safe Operation, Pollution Control

2.1 General remarks

2.2 Definition of terms

2.3 Operational safety instructions

Covers general safety instructions, signs, and workspace recommendations for plant operation.

2.4 To be observed

2.4.3 In case of maintenance and repair

2.5 Emergency measures

Describes the immediate actions to be taken in emergency situations for plant safety.

Construction and Function

3.2 Function

Explains the operational principles and safety precautions during the crimping process.

3.2.1 Assembly instructions

Operation

5.1 First commissioning

Guides through the initial steps for setting up and commissioning the plant.

5.2 Switching-on

Lists the prerequisites and steps for safely switching on the plant.

5.3 Switching-off

Describes the procedure for correctly switching off the plant.

5.5 Operating mode

5.6 Emergency stop

Instructs on how to activate the emergency stop and what to do before restoring power.

Maintenance

6.1 Daily maintenance

Outlines daily checks, cleaning tasks for the plant, crimping tool, and level indicators.

6.2 Monthly maintenance

6.3 Yearly maintenance