DANGER This symbol stands next to all safety in-
structions in this manual where danger
to life and limb may occur. Always ob-
serve these instructions and proceed
with special caution in these situations.
All other persons entrusted with work on
the machine must be informed of all
safety instructions. In addition to the in-
structions in this manual the general
safety and accident prevention regula-
tions must be observed.
ATTENTION This symbol stands at points in this in-
struction manual of particular im-
portance for compliance with regulations
and directives, for correct work flow and
for the prevention of damage to and de-
struction of the plant.
CRUSHING
HAZARD
This symbol stands at points in this in-
struction manual where a crushing haz-
ard to your hands may occur.
SHEARING
HAZARD
This symbol stands at points in this in-
struction manual where a shearing haz-
ard to your hands may occur.
IMPORTANT Special information in the instruction
manual on how to use the plant most ef-
ficiently.
Working steps or operations to be car-
ried out in the order stated.
General specifications.
Table 3-1 Symbols and their signification
2.2 Definition of terms
Residual hazards
Residual hazards are non-obvious risks which result from the use of the
plant. Although the plant has been developed, designed and built in ac-
cordance with state-of-the-art standards and the generally accepted
technical guidelines and regulations, residual hazards cannot entirely be
excluded – not even during designated use.
Safe Operation, Pollution Control
2-1
To Next Page
Loading...
