2.4.3 In case of maintenance and repair
Work on the hydraulic system
The plant is equipped with a hydraulic station including a pump and a
motor.
Any maintenance and repair work on the hydraulic station of
the plant or any components may only be carried out by expert staff of
UNIFLEX-HYDRAULIK GmbH!
Welding, cutting and grinding work
Welding work
cutting work and
grinding work
on and in the plant or in its surroundings require express permission –
there is risk of fire.
Even if the work is permitted, the plant must be cleaned from dust and
combustible materials.
Sufficient ventilation must be ensured.
Safe Operation, Pollution Control
2-7
To Next Page
Loading...
