Parker Parkrimp 2 – 83CE-083U - 3.2.1 Assembly instructions

Bulletin 4480-T12/UK
Hose Crimper Machine Parkrimp
®
2
Construction and Function
3-4
3.2.1 Assembly instructions
Figure 3-7 Rear die ring half
 Move cylinder and pusher fully up.
 Push rear die ring half up and lock it using a pin.
Figure 3-8 Adapter element
 Insert adapter element into die holder. Tilt it slight-
ly and position correctly.
Figure 3-9 Die set
 Insert die set into lubricated tool holder ensuring
that the individual segments are distributed even-
ly. The die sets are colour-coded according to
hose size.
Construction and Function
3-4