Parker Parkrimp 2 – 83CE-083U - Page 21

Hose Crimper Machine Parkrimp
®
2
Bulletin 4480-T12/UK
Construction andConstruction and Function
3-5
Figure 3-10 Spacer ring
 Insert spacer ring.
Figure 3-11 Two-part die ring
 Remove locking pin and lower two-part die ring
onto die.
 Ensure that the tongue and groove ring is posi-
tioned correctly.
Figure 3-12 Other half of the die ring
 Insert the other half of the die ring. Tongue and
groove ring serves to align the two halves.
Construction and Function
3-5