Parker PROFINET AC20 Series - Network Status (NS) LED; Module Status (MS) LED; Link;Activity (L;A) LED

DOC-0017-10-EN: AC20 Series PROFINET IO Option
14 (47) DOC-0017-10-EN-A 27.03.2023
Network Status (NS) LED
LED Status
Description
Comments
OFF
Offline
• No Power
• No Connection with IO Controller
GREEN (Solid)
Online (RUN)
• Connection with IO Controller Established
• IO Controller in RUN state
GREEN, 1 Flash
Online (STOP)
• Connection with IO Controller Established
• IO Controller in STOP state or IO Bad Data
• IRT Synchronization Not Finished
GREEN, Blinking
Blink
• Used by Engineering Tools to Identify the Ethernet
Node on the Network
RED (Solid)
Fatal Event
• Major Internal Error (this indication is combined
with a RED Module Status LED)
RED, 1 Flash
Station Name Error
• Station Name Not Set
RED, 2 Flashes
IP-Address Error
• IP-Address Not Set
RED, 3 Flashes
Configuration Error
• Expected Identification Differs from Real
Identification
Module Status (MS) LED
LED Status
Description
Comments
Off
Not Initialized
• No power or Module in SETUP or NW_INIT state.
Green
Normal Operation
• Module has shifted from the NW_INIT state
Green, 1 flash
Diagnostic Event(s)
• Diagnostic event(s) present
Red
Exception error
• Device in state Exception.
Alternating
RED/GREEN
Fatal event
• Major internal error (this indication is combined
with a red network status LED)
Link/Activity (L/A) LED
LED Status
Description
Comments
Off
No Link
• No Link, No Communication present.
Green (Solid)
Link
• Ethernet Link Established, No Communication
present
Green, Flickering
Network Activity
• Ethernet Link Established, Communication
Present