Parker PROFINET AC20 Series - Option Module Webserver; Parameter 0762 ACCESS Settings

DOC-0017-10-EN: AC20 Series PROFINET IO Option
34 (47) DOC-0017-10-EN-A 27.03.2023
10 Option Module Webserver
The option comms module built-in webserver provides a flexible environment for end-user interaction
configuration purposes, parameters setting and diagnostics.
• The parameter 0762 “ACCESS” BIT0 “IP CONFIG ENABLE”, BIT1 “WEB ENABLE” and BIT2
“WEB PARAMETERS ENABLE” must be set to TRUE via the AC20 webserver or DSE Lite.
• The web pages may be accessed by a web browser by entering the IP address of the AC20
Ethernet/IP option comms module. The main index page provides access to network configuration
parameters, network status information and access to the AC20 Parameters.