38
Din Module Manual Revision History
Rev. # Date Author Description
A
11/1/08 A.Dawson Creation of preliminary manual
B
11/20/08 A.Dawson First Release
C1
A.Dawson Updated to reflect cable changes based on testing from ETL.
C2
11/19/09 A.Dawson Addition of note in Modbus section and correction of register 109
settings to reflect pre-set stop bit values, even, odd =1, none =2
C3
3/26/10 A.Dawson Corrected error in RS485 A/B pin designation, it was reversed.
Removed Bit 4 Error from Sensor Status Registers, it is unused.
IOMI
02/07/18 A.Dawson Converted to Parker format, minor technical corrections.
To Next Page
Loading...
