Introduction
You will find the SciPres
®
pressure sensors easy to use. The state-of-the-art hardware and
software design of the SciPres
®
pressure sensor and monitor combination allows you to measure
and document the pressure of many filtration / separation processes. With proper maintenance,
the SciPres
®
pressure monitor will provide many years of excellent service and performance.
Please read the following instructions carefully!
Inspections: Remove the products carefully from the shipping container. Check the contents against
the purchase order to verify that all parts are included and undamaged.
Please do the inspection now, even if the products are not used immediately. Many carriers must
receive damage claims within seven days of delivery. Please retain all packing material so unit may
be shipped safely, if necessary.
Customer Service: Parker domnick hunter customer service: If assistance is required, please contact
us at:
Parker Hannifin Manufacturing Ltd Parker Hannifin Corporation
Parker domnick hunter Parker domnick hunter
Process Filtration - Europe Process Filtration - North America
Durham Road 2340 Eastman Avenue
Birtley, Co. Durham Oxnard, California, USA 93030
DH3 2SF, England toll free: 877 784 2234
phone +44 (0)191 4105121 phone: +1 805 604 3400
fax +44 (0)191 4105312 fax: +1 805 604 3401
email: dhprocess@parker.com email: dhpsales.na@parker.com
www.parker.com/dhpharma www.parker.com/dhsingleuse
Parker domnick hunter customer service personnel will be able to serve you more efficiently if you
have the following information:
• Serial number and model name of the equipment
• Installation procedure being used
• Concise list of symptoms
• List of operating procedures and conditions in use when problem arose
Calibration
The SciPres
®
monitor is a calibrated device, and is calibrated with test equipment that is traceable to NIST.
A Calibration Certificate is included with each unit, and has a one year expiration date.
It is highly recommended that the monitor be calibrated on an annual basis or more often if your
Metrology Department deems it necessary.
Parker domnick hunter provides this Calibration Service, complete with a new certificate, showing the
“as found” and “as left” data.
Contact your local Parker domnick hunter representative.
6
To Next Page
Loading...