Specifications - Sensors
Power
5 VDC provided by SciPres
®
Pressure Monitor.
Fluid Connections
Choice of five sizes: Luer,
3
/
8
” Barb,
1
/
2
” Barb,
3
/
4
” Tri-Clover (TC) Sanitary and 1” Tri-Clover (‘Ladish’) Sanitary.
Wetted Materials
Polysulphone meets USP Class VI and FDA 21 CFR 177.1520, all wetted
materials made with animal-free compounds.
Sensor Type
Medical grade, silicone piezoresistive sensing element
with on-chip temperature compensation.
Sensor Isolation
Insoluble silicone dielectric gel isolates sensing element from process
solution. The gel is a non-toxic, non-allergenic elastomeric system.
Pressure Range
-5 to 60 psi (-0.34 to 4.14 bar).
Accuracy
+/- 0.30 psi at -5 to 30 psi for 2 point calibrated sensors (can be improved
to -5 to 60 psi with 3 point calibration, also available)
Resolution
0.01 psi (0.001 bar).
Temperature Range
0 to 60 °C (0 to 140 °F).
Sensor Microchip
EPROM, Stores Sensor ID, and Calibration Factor.
Sensor Connector & Cables
Lockable and Waterproof.
9
To Next Page
Loading...