Bulletin 76-00 B
13
Gearmo USB to RS485 Adaptor Driver Installation Instructions
Steps Setup Instructions Display Notes
1
Insert the Gearmo FTDI driver CD
into the computer of choice’s CD-
drive.
The driver is also available for download at http://
www.gearmo.com/shop/usb-to-rs485-rs422-
converter-ftdi-chip-with-terminals/
If you choose to download the driver, proceed to
Step 5
These instructions will show how to install the
driver on a computer running Windows 7.
Windows XP, 2003, Vista, 7, 8 as well as Linux and
Mac OS 10.X are supported
2
Open the folder labelled ‘Driver’
located in the drive containing the
Gearmo CD (D: drive).
3
Now open the folder which
corresponds to the operating
system on your computer of
choice, in this case it is ‘win xp
server 2003 2008 Vista 7 8 32-
64bit’
4
Double click the executable le
labelled ‘CDM20828_Setup’ and
follow the on-screen instructions to
install the driver.
5
Following the link from Step 1 will
show the information page on
the Gearmo adapter. Under the
‘Drivers & Manuals’ tab on this
page, select ‘Latest FTDI Driver’ to
download the driver installation le.
6
Open the ZIP folder labelled
‘FTDI-Latest’ when the download
is complete. Double-click the
executable le in this folder and
follow the on-screen instructions to
install the driver.
Gearmo USB to RS485 Adaptor Driver Installation Instructions
To Next Page
Loading...