Parkside PDT 40 D3 Translation Of The Original Instructions

PDT 40 D3
GB
│
IE
│
NI
│
3 ■
Technical data
Dimensions: 241 x 235 x 59 mm
(W x D x H)
Weight
(without fasteners): approx. 1270 g
Maximum permissible
pressure: 8.3 bar
Recommended
pressure range: 4 to 7 bar
Air consumption per
Nailing process: approx. 0.09 l
per nailing action
Recommended
lubricant: compressed air special oil
Loading capacity: 100 pcs.
Nail lengths: 15, 25, 40, 50 mm
Staple lengths: 16, 25, 40 mm
Staple width: 5.7 mm
Recommended
hose diameter: ∅ 9 mm
Compressed
air quality: filtered, atomised oil and
condensate free
Noise and vibration data:
Measurement values determined in accordance
with EN 12549:1999, EN ISO 4871. The A-rated
sound pressure level of the appliance is typically:
Sound pressure level: L
pA
= 114.6 dB(A)
Uncertainty: K
pA
= 3 dB(A)
Sound power level: L
WA
= 125.6 dB(A)
Uncertainty: K
WA
= 3 dB(A)
These values are appliance-specific indicators and
do not reflect the noise development at the place
of usage. The noise development at the place
of usage depends, for instance, on the working
environment, the workpiece, the workpiece rest,
the number of nailing processes. If required, carry
out corresponding noise reduction measures rela-
tive to the workpiece construction and workplace
conditions; e.g. placing the workpiece on a noise-
dampening underlay, reducing the vibration of the
workpiece by clamping or covering, setting the
correct working pressure. In special cases, personal
protective equipment should be worn.
Wear hearing protection!
Vibration emission value:
Total vibration value calculated according to
ISO 8662-11:1999:
a
h,W
= 15 m/s
2
Uncertainty K = 1.5 m/s
2
Mechanical impacts (vibration)
The vibration parameter for the staple gun has
been calculated according to ISO 8662-11:1999
– hand-held motor-driven machines – measurement
of mechanical vibrations on the handle – staple
guns (see technical specifications). The value is an
appliance-specific indicator and does not represent
the effect on the hand-arm system while using the
appliance. The effect on the hand-arm system when
using the appliance depends on factors such as the
gripping force, the applied pressure, the working
direction, the set air pressure, the workpiece, the
workpiece rest.

Parkside PDT 40 D3 Specifications

General

Brand	Parkside
Model	PDT 40 D3
Category	Tools
Language	English