152
GB
IE
Translation of the original
EC declaration of conformity
Angle Grinder
Design Series PWS 125 E4
Serial Number
201811000001 - 201811265568
conforms with the following applicable relevant version of the EU guidelines :
2006/42/EC • 2014/30/EU • 2011/65/EU*
In order to guarantee consistency, the following harmonised standards as well as natio-
nal standards and stipulations have been applied:
EN 60745-1:2009/A11:2010 • EN 60745-2-3:2011/A13:2015
EN 55014-1:2017 • EN 55014-2:2015
EN 61000-3-2:2014 • EN 61000-3-3:2013
This declaration of conformity is issued under the sole responsibility of the manufacturer:
Christian Frank
(Documentation Representative)
Grizzly Tools GmbH & Co. KG
Stockstädter Straße 20
63762 Großostheim
Germany
20.11.2018
EU of the European Parliament and the Council of 8 June 2011 on limiting the use of certain
harmful substances in electrical and electronic appliances.
To Next Page
Loading...
