13
GB IE CY
Broken bits from the piece being worked
and cause injuries even beyond the di-
rect working area.
the insulated gripping surfaces
when performing work in which
the cutting tool may come into
contact with hidden wiring or its
own cord. Contact with a live wire
can also cause a charge in metal parts
of the device and result in an electric
shock.
-
tating attachment tool. If you lose
control of the device, the power cord
can become separated or caught and
your hand or arm may be pulled into
the rotating attachment tool.
before the attachment tool has
come to a full stop. The rotating
attachment tool can come into contact
with the surface upon which it is set,
whereby you could lose control of the
electric tool.
run whilst you are carrying it.
Your clothing may accidentally come
into contact with the rotating attachment
tool and get caught and the attachment
tool could drill into your body.
your electric tool routinely. The
motor air pulls dust into the housing
and, should too much metallic dust col-
lect, could cause electrical hazards.
Sparks could
ignite this material.
which require liquid coolant.
Using water or another liquid coolant
could lead to electrical shock.
Additional safety instructions
socket with a residual current circuit
breaker of rated residual current no
more than 30 mA.
away from the disc. If they are dam-
aged or cut through, immediately pull
the plug from the outlet. Do not touch
the cable before it has been discon-
nected from the power supply.
Risk of electric shock!
-
nection line must always be executed
by the manufacturer of the electric tool
or his/her customer service in order to
avoid any hazards.
-
dicated rotational speed is at least as
name plate of the device.
grinding disc before use. Do not use
any damaged or deformed grinding
discs. Replace any damaged or worn
grinding discs.
grinding do not present a danger, e.g.
-
stances.
gloves, respiratory protection and ear
protection when grinding, brushing and
cutting.
grinding disc and spark protection or in
close proximity to the protective hoods.
There is a risk of crushing.
be covered due to functional reasons.
Therefore, proceed cautiously and hold
slipping which could cause your hands to
To Next Page
Loading...
Need help?
General