17
GB IE CY
Make sure that the power supply
voltage matches the voltage rating
indicated on the device‘s type plate.
several time in a row.
that the appliance is becoming slower.
-
siderably shorter operating times, the bat-
tery is used up and needs to be replaced.
Only use an OEM spare battery available
from our Customer Service.
instructions as well as the environmental
protection regulations and information.
caused by improper handling.
Removing / inserting the
battery
1. To remove the battery (9) from
the appliance, press the release
button 10) on the battery and
pull out the battery.
2. To insert the battery (9), place it
on the guide track and push it
back into the appliance. It will
audibly snap in.
Recharging the battery
1. Remove the battery (9) from the
appliance.
2. Insert the battery (9) in the charg-
ing compartment of the battery
charger.
3. Plug the battery charger into a
mains outlet.
4. When the battery (9) is fully
recharged unplug the battery
charger from the mains.
5. Pull the battery (9) out of the bat-
tery charger.
Charger ready
Battery such alleged charged
Battery charging
Battery has to be charged in advance for
30 minutes before charging starts
Battery defect
Battery too cold or too warm. Battery can-
not be charged
Used batteries
considerably shorter operating times,
the battery is used up and needs to be
replaced. Only use an OEM battery
pack replacement available from our
Customer Service.
instructions as well as the environmental
protection regulations and information
(see “Cleaning and Maintenance”).
Checking the battery charge
level
The battery’s (9) charge level is indicated
by the charge state indicator (8).
Press the activation button battery indicator
on the battery.
The LEDs indicate the battery’s charge
level.
= Battery fully charged
= Battery half charged
red = Battery needs to be charged
To Next Page
Loading...
Need help?
General