6772 Calorimetric Thermometer Instruction Manual
5-13
Net Heat/Dry Heat Factors
Fixed Hydrogen:
ON/OFF and value entry.
Fixed Oxygen:
ON/OFF and value entry.
Fixed Nitrogen:
ON/OFF and value entry.
Calculate Net Heat of Combustion:
ON/OFF. Turn On to have the calorimeter
calculate the net heat of combustion.
Fixed Moisture as Determined:
ON/OFF and value entry.
Fixed Moisture as Received:
ON/OFF and value entry.
Dry Calculation:
ON/OFF. Turn on to have the calorimeter calculate the result on a dry basis.
Data Entry Controls Menu
Prompt for Bomb ID:
In the ON position the controller will prompt
for a Bomb ID (1-4) when a test is started.
Weight Entry Mode:
This key steps through the options for
entering sample weights either manually
through the touch screen, network or through
the balance (USB) port.
Acid Entry Mode:
This key steps through the options for
entering acid correction value either
manually through the touch screen or automatically through the balance (USB) port.
Net Heat Entry Modes:
This key accesses a menu listing options for entering hydrogen, oxygen, and nitrogen
content for calculating the net heat of combustion either manually through the touch screen
or automatically through the balance (USB) port.
Auto Sample ID Controls:
Accesses sub-menu for controlling the automatic assignment of sample identification
numbers.
To Next Page
Loading...
Need help?
General