6
Before you begin
·
if you are using an Android™ smartphone, select Settings > Wireless and networks >
Wi-Fi.
3. Select the network: Bebop2_xxxxx.
4. Wait for your smartphone to connect to the Wi-Fi network of the Bebop 2. This
connection is generally represented by the Wi-Fi logo appearing on the smartphone
screen.
5. Start the FreeFlight 3 application.
> The connection between your smartphone and the Bebop 2 is established
automatically.
See the Network settings section for further information.
Changing the propellers
1. Remove the propellers with the propellers mounting tool.
2. Install the new propellers:
·
place the propellers with a hole in the middle on the motors with a protruding axle
(front right and rear left motors);
·
place the propellers without a hole on the motors without protruding axle (front left
and rear right motors).
3. Lock the propellers with the propellers mounting tool.
To Next Page
Loading...
